Click the
![\"\"](\"https:\/\/www.mobeye.com\/files\/IconD-Datasheet.png\")
icon to find information about the subject.<\/p>\n\n\n This page provides support information on the Mobeye i110, Mobeye Argos and Mobeye Outdoor Alarm.
Click the icon to find information about the subject.<\/p>\n\n\n
<\/a>troubleshooting<\/li>\n<\/ul>\n\n\n\n<\/a>how to place the SIM card<\/li>\n\n\n\n<\/a>choice of the SIM card<\/li>\n<\/ul>\n\n\n\n<\/a>installation code vs user code<\/li>\n\n\n\n<\/a>(dis) arming by times schedules<\/li>\n\n\n\n<\/a>how to arm\/disarm remotely?<\/li>\n\n\n\n<\/a>I lost my installation code<\/li>\n<\/ul>\n\n\n\n<\/a>what is passive infrared?<\/li>\n\n\n\n<\/a>what is the best position?<\/li>\n\n\n\n<\/a>what to do if a false alarm occurs?<\/li>\n\n\n\n<\/a>do I need to reset an alarm ?<\/li>\n<\/ul>\n\n\n\n<\/a>multiple sensors per input<\/li>\n\n\n\n<\/a>connection of siren or flash light<\/li>\n\n\n\n<\/a>what is a relay output?<\/li>\n<\/ul>\n\n\n\n<\/a>LED behaviour (i110\/Argos)<\/li>\n\n\n\n<\/a>LED behaviour (Outdoor Alarm)<\/li>\n<\/ul>\n\n\n\n<\/a>when to replace the batteries?<\/li>\n\n\n\n<\/a>what brand of batteries?<\/li>\n<\/ul>\n\n\n\n<\/p>\n<\/div>\n\n\n\n
<\/a>manuals<\/li>\n\n\n\n<\/a>older manuals<\/li>\n\n\n\n<\/a>datasheets<\/li>\n\n\n\n<\/a>differences between i110 and Argos<\/li>\n\n\n\n<\/a>CE declaration of conformity <\/li>\n<\/ul>\n\n\n\n<\/a>sales information<\/li>\n<\/ul>\n\n\n\n<\/a>information and intro video<\/li>\n\n\n\n<\/a>registration and user manual<\/li>\n\n\n\n<\/a>SIM\/portal prices <\/li>\n\n\n\n<\/a>more portal support<\/li>\n<\/ul>\n<\/div>\n<\/div>\n\n<\/div>\n\n\n\nSee the steps in the picture:<\/p>\n\n\n
![\"\"](\"https:\/\/www.mobeye.com\/files\/IA-PlaceSim.jpg\")
<\/figure><\/div>\n\n\nThe Mobeye Argos and Mobeye i110 have an installation code and a user code. With the installation code you can change the settings and you can switch on and off. The factory code is \u201c1111\u201d. Change this to your own code upon commissioning. The user code is to turn on and off only. You can’t change settings with this code. The factory user code is \u201c8888\u201d. If the system is armed with the user code, it must be switched off with this one. The same goes for the installation code; the code that is used to switch on is the same as is needed to switch off.<\/p>\n\n\n\n
The Mobeye Argos and Outdoor Alarm CMVXI-R can switch on and off automatically via a time schedule. This happens when the set time is “passed”. The system can still be turned on or off manually. In a battery-powered Mobeye device the GSM module is switched off in standby mode. The system will be alert to detect intrusion and report it, but it cannot be accessed remotely. If the system has external power (possible for the Mobeye Argos and Outdoor detector), the GSM module is always open and you can switch it on and off via a text message command. There are additional options via the Mobeye Internet Portal. The alarm despatch can be adjusted there. An “switch on” or “switch off” command can also be set up for the Mobeye Argos, which will be executed after the next test message.<\/p>\n\n\n\n If you have forgotten the installation code for the Mobeye i110 or Argos, please contact us to reset it to factory settings. The settings will not change, only the code goes back to “1111”.<\/p>\n\n\n\n An understanding of passive infrared radiation<\/a> is important for the correct placement of the alarm. Passive infrared does not see through windows. It notices a “moving heat source”. So watch out for drafts, smoldering fires and rattling mailboxes; these can be disruptive. Avoid direct sunlight on the lens, including through a window. Small animals (spiders, flies) are no problem as long as they are not on the lens. A dog will be seen by the Mobeye i110 and Argos. So turn the lens away from where they come (a dog usually stays low), preferably in another room. <\/p>\n\n\n\n A false alarm does does not occur due to a user error comes from a disruptive source. To prevent an alarm from being taken seriously, a false alarm should always be understood and the cause removed. See “the best position \u2026<\/a>” for tips. If you doubt the device, put it in a place where it can’t see a movement (in a cabinet or in the box) with the system turned on.<\/p>\n\n\n\n After a burglary detection and alarm reporting, the Mobeye burglar alarm will be inactive for 5 minutes and will not detect any new movements. After this it is automatically sharp again. So it does not need to be reset manually. This inactive period can be shortened or extended in the Mobeye Argos and Outdoor Detector.<\/p>\n\n\n\n Multiple sensors can be connected to one NO\/NC alarm input. Place a normally closed input contact in series, a normally open contact in parallel. In this way, an activated sensor will trigger an input alarm. Since there is one text per input, it does not provide specific information about the activated sensor.<\/p>\n\n\n\n If a device is fully battery operated, without external voltage, the batteries should last at least one year. This is even with a daily (test) report. If the GSM strength on site is weak, it may be shorter. Like any mobile phone, the internal GSM module will boost the power to find signal. This affects battery usage. You will find the latest manuals on the documentation<\/a> page. Are you looking for manuals for an earlier version? Consult us. <\/p>\n\n\n\n
Example: The system shuts down at 8 am, according to schedule. You switch it off yourself at 7.30 am; it stays off at 8 am.
Example: the system is activated at 6 pm, as scheduled. Before this time you can do this manually. The schedule ensures that the system is active at night, even if you forget to do it manually.
There are two adjustable time schedules, which you assign to the days of the week. Monday counts as day “1”.
Example<\/strong> – to be activated on weekdays at night, and the entire weekend:
Arming Schedule1: 1800, Disarming Schedule1: 0700, DAYS1: 12345
Explanation: the system will switch on on Friday at 6 pm and off on Monday at 7 am. Schedule 2 is not used.
Example<\/strong> – to be activated on weekdays at night, partly at Saturday and the entire weekend:
Arming Schedule1: 1800, Disarming Schedule1: 0700, DAYS1: 12345
Arming Schedule2: 1700, Disarming Schedule1: 1400, DAYS2: 6<\/p>\n\n\n\n
\n\n\n\nRemote switching on and off<\/h3>\n\n\n\n
\n\n\n\nHow to reset the installation code<\/h3>\n\n\n\n
\n\n\n\nWhat is the best position for the alarm system?<\/h3>\n\n\n\n
The Mobeye Outdoor Detector is immune to disturbances such as leaves, snow, headlights. Birds, cats and (small) dogs are also not seen, because the device has two detectors. Only if both perceive something, it will be validated and an alarm will follow. The Mobeye Outdoor Detector must be hung at a height of 1.5 meters to have the double detection work properly.<\/p>\n\n\n\n
\n\n\n\nWhat to do in case of a false alarm?<\/h3>\n\n\n\n
\n\n\n\nNo reset is necessary after an alarm<\/h3>\n\n\n\n
\n\n\n\nConnecting multiple sensors to an input<\/h3>\n\n\n\n
\n\n\n\n LED behaviour (Argos and i110, outside)<\/h3>\n\n\n\n
\n
The device is not connected to the Mobeye Internet Portal or no valid phone number has been entered.<\/li>\n\n\n\n
GSM module searches for network connection.<\/li>\n\n\n\n
The device has network connection.<\/li>\n\n\n\n
The code was entered incorrectly 3 times. The device remains locked for 10 minutes. Wait or replace the batteries.<\/li>\n\n\n\n
No valid SIM card is used or the SIM card is blocked. Change the “puk” in a regular phone.<\/li>\n<\/ul>\n\n\n\n<\/div>\n\n\n\nLED behaviour (inside, next to SIM card)<\/h3>\n\n\n\n
\n
<\/strong>GSM module is looking for network connection. If this takes a long time, there is something wrong with the SIM card or no network is available. If the lights turn off completely within 1 minute without connecting to the network, it may indicate low battery power.<\/li>\n\n\n\n
<\/strong>GSM module has network connection.<\/li>\n<\/ul>\n\n\n\n
\n\n\n\nBattery lifetime<\/h3>\n\n\n\n
If a device is externally powered and the batteries are used as a backup in the event of a power failure, they will last much longer. This is more than 3 years for the latest Mobeye devices.
A message follows at low battery voltage. For devices that are connected to the Mobeye Internet Portal, this is a \u201cservice notification\u201d. If it is missed, the absence of a test message (\u201ckeep alive\u201d) is a second indicator. A standalone device sends the low battery notification to the first telephone number (TEL1).<\/p>\n\n\n\n
\n\n\n\nManuals for earlier hardware and software versions<\/h3>\n\n\n\n
\n\n\n\nDeclaration of Conformity<\/h3>\n\n\n\n