To measure is to know

Reading out, alarming and logging
of sensor values


Mobeye SISTM

For almost every measurable value a sensor exists. The Mobeye SISTM can read almost any sensor value. Even battery powered if necessary.

Logs analog values,
monitors the set alarm limits.

The Mobeye SISTM measures values of almost any industrial sensor. The inputs of the SISTM read the output values and convert them into meaningful parameters. If (min./max.) limit values have been set and these are exceeded, the contact persons receive an alarm message. Periodically, the sensor values are logged and displayed in an online portal.

Measurement of analog values

The Mobeye SISTM is a 2-channel module, suitable for sensors with a range of 4-20mA, 0-1V, 0-10V and and anything in between. The SISTM provides periodic logging and data synchronisation to the portal. An LTE-M 4G + 2G communication module is integrated.

External voltage vs battery powered

Depending on the version, the CML4015 and the sensors can run completely on batteries or on a 12-24VDC voltage source.

The CML4015-HP uses external power for the SISTM and sensors. With continuous measurement on the sensors, an alarm message is initiated if the set limit is under or exceeded. The power supply is then immediately monitored. If this fails, a message will follow.

The CML4015-LP is fully battery powered and provides the power supply for the SISTM and sensors. The CML4015-LP periodically measures the sensors, with an adjustable interval and warm-up time of the sensors. The measured values are logged. If the alarm limit falls below or is exceeded, an alarm message is issued.

Alarm messages

Per alarm input a min./max. alarm limit is adjustable. In an alarm situation, the Mobeye CML4015 sends notifications by app (IOS/Android), telephone call (voice message), text message and/or e-mail. The message also contains the actual values. For push messages, you can choose between an escalation plan or group message. With the escalation plan, the recipient can confirm the push message, so that the other contacts no longer receive the message. If none of the recipients confirms the push message, a call will still go out. The number of contacts is unlimited.

SIM card and portal

The SISTM works with the Mobeye SIM card including the use of the Mobeye Internet Portal and the Mobeye Messages app. With the Mobeye SIM card, communication is over the 4G LTE-M network with 2G as a fallback.

Mobeye CML4015
Sensor values
  • 0 – (max.) 10V
  • 4 – 20mA
  • Vacuum measurement
  • Pressure measurement
  • Conductivity of water
  • Soil moisture

Reliable and simple

  • To read universal sensors
  • Alarm via app, call, SMS and email
  • Two alarm inputs to read two sensor values
  • Battery powered or externally powered


Mobeye SISTM

Summary of features


  • min./max. alarm limit per sensor input, log interval (in min.)
  • graphical representation of the values
  • power failure monitoring
  • 2x analog input
  • data transfer interval (in hours)
  • measurement continuous vs. periodic


  • to private contacts (unlimited) via an app, call, SMS and/or e-mail, or to a monitoring center (PAC)


  • input alarm (with value), alarm reset
  • power failure and power recovery
  • battery low voltage, (missed) test call

Other settings

  • input type 0-1V, 0-10V, 4-20mA
  • log interval 1 … 9999 minutes
  • transmission interval to portal 1 … 999 hours
  • delay time on input and power failure alarm
  • conversion value
  • label
  • test interval (keep alive)
  • alarm repeat frequency
  • silent or audible alarm
  • identification text, alarm texts
  • calibration value
  • sensor warm-up time
  • automatic on and off times
  • open collector output

Mobeye SIM card (option)

  • activate online
  • gives access to Mobeye Internet Portal and App
  • communication via 4G LTE-M and 2G Quadband EGSM
  • flat-fee, multi-provider, non-steering

Mobeye Internet Portal and App
(when using Mobeye SIM card)

  • alarm by push message/text/call/email
  • push messages as a group message or one after the other
  • log values as graph, meter or table (and download)
  • status display
  • online programming
  • keep-alive monitoring
  • position display (Cell ID)


  • CML4015-HP: 130 x 85 x 35 mm
  • CML4015-LP: 130 x 85 x 60 mm

Power supply

  • CML4015-HP: 12-24V DC (regulated) + 2x CR123 lithium
  • CML4015-LP: 6-12V (7.2V battery pack available as accessory)
    sensor power supply: 5V or 15V

Battery life

  • CML4015-HP: > 3 years at normal use
  • CML4015-LP: depending on battery and use up to 10 years

Communication module

  • 4G LTE-M (WW) + 2G Quadband EGSM 850/900/1800/1900 MHz


  • CML4015-HP: incl. 2x CR123 batteries, SIM card
  • CML4015-LP: incl. SIM card

Accessories (not included)

  • 7.2V 34Ah battery pack, mains adapter, external antenna
  • various sensors, consult Mobeye for advice