2G/4G Fire alarm communicator

Telephone notifications for
Ei Electronics detectors

CM4410

Mobeye 2G/4G Fire Alarm Communicator

The Mobeye fire communication module CM4410 fits the Ei Electronics Ei600 series. In case of fire, the CM4410 will send notifications to contacts. Because just a siren may not be enough.

To get informed about a fire by phone alert.
After all, you are not always on site.

The Mobeye CM4410 is the communication module in the Mobeye 2G/4G Smoke Detector and Mobeye 2G/4G Heat Detector. In addition to the loud siren of the fire detector, the CM4410 send notifications to contacts, via a push notification, call, SMS text message or email. Works fully battery-operated.

This product is successor of the Mobeye CM2410.

The Mobeye CM4410 is ready-made for specific Ei Electronics detectors. To make sure you have the right detector, we recommend one of the following sets:

CM4400

  • stand-alone smoke detector with alarm notifications
  • CM4410 + Ei605TYC

CM4400RF

  • smoke detector with communicator and RF-module, to be used in network of EI detectors
  • CM4410 + Ei605TYC + Ei650M

CM4400H

  • stand-alone heat detector with alarm notifications
  • CM4410 + Ei603TYC

CM4400H-RF

  • heat detector with communicator and RF-module, to be used in network of EI detectors
  • CM4410 + Ei603TYC + Ei650M
Combinations for sole use

The Mobeye fire communication module CM4410 replaces the mounting plate for the Ei Electronics “Ei600 series”. If no interconnection is necessary, and only a single fire detector with communication module is needed, the CM4410 can work with: Ei605C, Ei605TYC, Ei650C, Ei603C, Ei603TYC.

Combinations for detectors in a wireless network

A wireless network of Ei Electronics detectors consists of Ei detectors with an RF module, one being equipped with a Mobeye CM4410. In the event of a fire, all sirens will sound and the GSM detector will report the fire to contacts.
NOTE: The fire detector with CM4410 must be: Ei605C, Ei605TYC, Ei603C or Ei603TYC. The RF module in this detector must be the Ei650M. Due to these requirements, we advise to always start with the Mobeye CM4400RF or CM4400H-RF, see this page. The other detectors in the network can be any smoke, heat or CO detector from the Ei Electronics series. All Ei Electronics RF modules are mutually compatible..

Fire alarm notification from other detectors

Mobeye offers fire notification modules for various smoke detectors. The wired output signal of the smoke detector is crucial in this. For a potential-free contact or an RF relay module, choose the Mobeye CM4000. to read out an analog signal, choose the Mobeye TwinlLog. For 230VDC powered smoke detectors, we recommend the Ei Electronics 3000 series, relay module and Mobeye CM4100.

Alarm messages

In the event of a fire alarm, the siren warns the people present with a loud signal. In addition, the contacts receive a notification by app (IOS/Android), telephone call (voice message), text message and/or e-mail. For the push messages there is a choice between an escalation plan or group message. With the escalation plan, the recipient can confirm the push message, so that the other contacts no longer receive the message. If none of the recipients confirms the push message, a call, SMS and/or e-mail will still be sent out. The number of contacts is unlimited.

Battery-operated

The Mobeye fire alarm communicator works autonomously on batteries and can therefore be used anywhere. The CM4410 works for more than a year on 2x CR123 batteries.

Network and SIM card

The Mobeye SIM card gives the device full functionality, including the use of the Mobeye Internet Portal and the app. With the Mobeye SIM card, communication takes place over the 4G LTE-M network with 2G as fallback.
When you insert your own SIM card, the device works on 2G. Alarm messages are then sent via SMS and/or call to max. 5 telephone numbers.

Mobeye CM4410
Applications
  • Residential building
  • Void property
  • Vulnerable people
  • Hotels with 24h obligation

Easy and effective

  • Alarm formwarding for fire detector
  • Alarm via app, call, SMS text message, email
  • Easy installation
  • Full insight into device when connected to Mobeye Internet Portal

CM4410

Mobeye Fire Alarm Communicator

Summary of features

Messages

  • fire alarm
  • battery low, (missed) test message

Alarming

  • to private contacts via an app, call, SMS and/or email, or to an emergency room (ARC)

Other settings

  • identification text, alarm text
  • test message (keep-alive)

Mobeye SIM card (option)

  • online activation
  • gives access to Mobeye Internet Portal and App
  • communication via 4G LTE-M and 2G Quadband EGSM
  • low-cost, flat-fee, multi-provider

Mobeye Internet Portal and App
(when using Mobeye SIM card)

  • alarm per push messages/SMS/call/email/ARC
  • push messages as group message or sequential
  • status display
  • online programming
  • keep-alive monitoring
  • position display (Cell-ID)

Own SIM card (option)

  • alarm notifications via SMS text message and call to max. 5 contacts
  • communication via 2G Quadband EGSM

Communication module

  • 4G LTE-M (WW) + 2G Quadband EGSM 850/900/1800/1900 MHz

Dimensions

  • diameter 12 cm, height : 3.8 cm (2,8 cm added to Ei detector)

Power

  • 2x CR123

Contents

  • CM4410
  • 2x CR123 batteries
  • Mobeye SIM card (optional use)

Accessories

  • Ei605TYC, Ei603TYC, RF module, other Ei Electronics detectors

Cooperation

  • The CM4410 is designed in consultation and with the approval of Ei Electronics, based on the original Ei Electronics drawings.